Formoa Parquet

Key features

• Ready-to-use (no mixing)
• Excellect wet holding strength
• Apply to clean, dry, free from dust or grease substrates. Paying particular attention to concrete subfloors.
• Apply evenly with a notched trowel. Fine trowel for small substrate and/or smooth substrate. Large trowel for large and/or coarse substrate), apply as much as can be utilised within 30mins. Lay parquetonto adhesive covered floor and pressed down firmly within 30mins.
• Do not apply flooring if skin has formed – Remove and apply fresh adhesive to ensure sufficient bonding.
• Do not apply in areas of high humidity (Bathrooms/wet rooms) or rooms/areas at high humidity (after decorating – water-based paints, plaster etc). This could impact the adhesive transfer free time and bonding performance.
• Do not apply against rising damp, or areas susceptible to rising damp.
• Do not apply to frozen areas or standing water.
• Remove any spilled / misapplied adhesive when wet. Cured adhesive can be mechanically removed only