Purok VX89 is a very fast curing, low odour acrylic structural adhesive that is bio-based. It is a high strength, impact toughened adhesive that can withstand dynamic loads.

A structural adhesive tailored for applications that prioritise speed and a better working environment. Its toughened, semi-rigid formulation forms tough, impact-resistant bonds to metals, composites and plastics with minimal surface preparation. With a working time of 2-3 minutes and handling strength reached in 4-6 minutes (at 20°C), it suits applications that need fast turn-around.

Specifications

Pack sizes

50ml Cartridge; 250ml Cartridge; 490ml Cartridge; Also bulk options available; Cure Speed and Colours; Working time: 2-3 minutes; Handling time (>0.4 MPa): 4-6 minutes. Colours: white, cream or black

How to use

• Application Temperature: Should be between +10°C and +35°C. Higher or lower temperatures can impact cure speed and adhesive performance.
• Surface Preparation: Clean substrates with IPA. Purok VX89 needs no further preparation on the metals tested. FRP, polycarbonate and PVC reach higher strengths when abraded with a 120 grit pad, then cleaned with IPA.
• Application: Purok VX89 is a two-component adhesive mixed 10:1 by volume. Follow the proper instructions before using it.

Typical applications

• Composite assembly: Fast composite-to-composite and composite-to-metal bonding where a quick build-up of strength supports throughput.
• Repairs and field work: Fast structural bonding where odour or exotherm matters, including enclosed spaces or work near people and animals.
• Structural applications under dynamic load: Any application that needs a fast, tough, structural bond and will see impact or movement.