Formoa 760 is a very high quality hybrid polymer based seam-sealant that can be beaded or sprayed. Once cured it provides a very tough and flexible coating for underbody and chassis protection, helping to prevent water ingress.

Specifications

Base material	Hybrid polymer
Consistency	Stable paste
Curing system	Moisture
Through-cure rate	2.5 mm/24 h
Density	1.35 kg/l
Elasticity modulus at 100% (ISO 37)	0.5 N/mm²
Elongation at break (ISO 37)	150%
Tensile strength (ISO 37)	1.6 N/mm²
Shear strength (ASTM D1002, 6 mm/min)	1.2 N/mm²
Shore A hardness ±5	65
Skin-over time	13 min
Viscosity C&P @ 0.6 s-1	70 Pa.s
Volume alteration	<1%
Colour stability, UV exposure (ASTM G154, CIELab ΔE)	<1
Colour	Black or grey
Contents	290 ml cartridge or 200 L on request
Shelf life	12 months unopened, cool and dry, +5 °C to +25 °C
Application temperature	+5 °C to +40 °C

These values may vary depending on environmental factors, such as temperature, moisture and type of substrates.

How to use

• Apply with the Formoa SS spray applicator.
• Prime non-porous surfaces with Formoa Surface Activator.
• Clean with Formoa wipes before curing; tool with a soapy solution before skin formation.
• Overpaintable with most industrial lacquers (compatibility test advised).

Typical applications

• Sealing of welded seams and joints
• Acoustic vibration dampening
• Prevention of water ingress
• Complete under-body protection